15000rpm High Speed Micro Centrifuge, D2012 Plus | DLAB Scientific

Q1: What are the official technical specifications of the DLAB D2012Plus High-Speed Micro-Centrifuge?

• Model: DLAB D2012Plus High-Speed Micro-Centrifuge.

• Speed Range: 500 to 15000 rpm, with an increment of 100 rpm.

• Maximum RCF (Relative Centrifugal Force): 15100 x g, with an increment of 100 x g.

• Speed Accuracy: Plus or minus 20 rpm.

• Rotor Capacity: Supports 0.2 mL, 0.5 mL, 1.5 mL, and 2 mL tubes up to 12 tubes simultaneously (12 x 1.5/2.0 mL rotor).

• Run Time: 30 seconds to 99 minutes, or continuous HOLD operation mode.

• Driving Motor: Maintenance-free brushless DC motor.

• Noise Level: Quiet operation at less than or equal to 54 dB to 56 dB.

• Power Requirements: Single-phase, AC 110V to 240V, 50Hz/60Hz, 3A (100W).

• Dimensions & Net Weight: 255 x 245 x 140 mm; Net Weight: 6 kg.

Q2: What is the price and local procurement procedure in Bangladesh (BD)?

• Price Range: In Bangladesh (BD), the regular market price for the DLAB D2012Plus High-Speed Micro-Centrifuge typically ranges between BDT 130,000 and BDT 140,000, depending on import shipping tariffs, customs duties, and local supplier support packages.

• Procurement Procedure: For official corporate price quotations, institutional tenders, and direct stock verification in BD, contact authorized laboratory distributors such as Federal Scientific Mart (fsm.com.bd).

Q3: What warranty coverage and technical support are provided in Bangladesh?

• Warranty Terms: The DLAB D2012Plus comes standard with a 12-month (1-year) factory warranty covering motor failures, control board defects, and power circuit issues.

• Local Support: Authorized local suppliers like Federal Scientific Mart provide professional technical guidance, installation assistance, rotor accessory availability, and maintenance support across Bangladesh.

Q4: How do the brushless DC motor and special safety certifications enhance performance?

• Rapid Acceleration: The powerful brushless DC motor drive quickly accelerates the rotor to set speeds while maintaining quiet acoustic levels.

• Rigorous Safety Compliance: Passed rigorous explosion-proof tests and is accredited with CE, cTUVus, FCC certificates, and MCA tests according to IEC/EN61010-2-20.

Q5: Which primary applications and industries utilize the D2012Plus centrifuge?

• Molecular Biology & Biochemistry: Micro-filtration, DNA/RNA sample preparation, and protein separation protocols.

• Clinical & Diagnostic Labs: Rapid pelleting of cells, blood fraction separation, and micro-tube spin-downs.

• Academic & Research Institutes: Routine high-speed centrifugation tasks in university laboratories.

Q6: How do you operate and execute a centrifugation run on the D2012Plus step-by-step?

• Placement: Place the centrifuge on a firm, flat, and level laboratory table, ensuring all four rubber feet stand firmly without vibration.

• Loading: Symmetrically load your sample tubes into the rotor to maintain proper balance, and secure the rotor lid tightly.

• Parameter Setup: Turn on the power switch, use the parameter adjustment knob to set your desired speed (rpm or rcf) and timer duration (or continuous HOLD mode).

• Execution: Close the lid until the door interlock engages, then press start; use the dedicated pulse button for quick spin tasks if needed.

• Retrieval: Wait for the run to complete and the lid lock to release, then safely retrieve your separated samples.

Q7: What safety protection mechanisms are built into the unit?

• Multiple Protections: Includes a door interlock, over-speed detector, over-temperature detector, and an automatic internal self-diagnosis system that alerts operators to anomalies on startup.

Q8: How do you properly clean and maintain the centrifuge?

• Chamber & Housing Care: Always disconnect the power cord before cleaning. Wipe down the inner bowl and exterior casing using a soft cloth dampened with mild neutral detergent.

• Rotor Maintenance: Inspect the aluminum or high-grade plastic rotor regularly for chemical residue or tube leaks. Keep the rotor clean and dry when stored.

Q9: What items are included in the standard factory package when purchased?

• Main Unit: DLAB D2012Plus High-Speed Micro-Centrifuge main body.

• Rotor Included: Standard 12 x 1.5/2.0 mL tube rotor with matching lid and adapters for smaller tubes (0.2 mL / 0.5 mL).

• Documentation & Power: Power cord, user instruction manual, and factory quality inspection certificate.

Q10: Why purchase DLAB laboratory equipment from Federal Scientific Mart (fsm.com.bd)?

• Genuine OEM Supply: 100% authentic DLAB Scientific equipment imported directly from certified manufacturing lines with official serial numbers.

• Local Technical Support: Expert setup advice, accessory availability, and reliable local warranty service in Bangladesh.

• Nationwide Logistics: Safe, secure delivery to Dhaka, Chittagong, Rajshahi, Khulna, Sylhet, Barisal, Rangpur, and clinical or research facilities across Bangladesh.